SERVICES
Get Your Free Quote!
Get in touch and we'll get back to you as soon as we can. We look forward to hearing from you!
Thank you for contacting us.
We will get back to you as soon as possible
We will get back to you as soon as possible
Oops, there was an error sending your message.
Please try again later
Please try again later
Servicing the greater Madison, Wisconsin, Concrete Lifting Technologies is determined in offering you a cost-effective solution to raise your concrete instead of replacing sunken or damaged concrete. By using polyurethane injection foam, we can raise your concrete to provide a sturdy, permanent solution to sinking concrete. It's cleaner, too - we use 5/8" holes to inject our foam, as opposed to 1 ½ - 2" holes for traditional mudjacking operations.
RESIDENTIAL SERVICES
Hate that uneven concrete? Not only is is unsightly, but it's unsafe. Sinking concrete driveways and sidewalks are common trip hazards that can be dangerous. And, left unaddressed, the problem will only get worse.
That's where we come in. We work with homeowners to address these issues, including:
- Driveways
- Sidewalks
- Staircases
- Patios
We use polyurethane lifting material that won't break down, leaves less mess than mudjacking, and won't tear up your existing concrete! We work with homeowners to address the issue, and assess the best course of action so you can enjoy your driveway, patio, or sidewalk, worry-free and stress-free for years to come, all at half the cost of replacing your existing concrete.
We also excel in void filling and ground stabilization, for those bigger issues that can pose a serious threat to your home's foundation. We use the same polyurethane injection material to solidify the ground around your home's foundation to give your home a stable base that won't degrade or erode away.
SOIL STABILIZATION
One of the potentially most disastrous threats to any home is the sinking ground that your home is sitting on. Many times, after a house is built, the ground the house is built on shifts and settles, weakening and changing the structure of the house. You can see evidence of ground shifting in a number of ways:
- Cracks in interior walls
- Cracks in foundation
- doors and windows that won't close or have gaps when closed
POLY VS MUDJACKING
What is the difference between Mudjacking and Polyurethane Concrete Raising?
Material
Holes
Cost
Both methods achieve the same results: raise and support sunken or unstable concrete slabs by drilling holes and pumping material under the slab.
Material
Settled concrete is commonly a result of poor soil conditions below a slab. Because of this, Polyurethane has become a popular repair method because the material is so lightweight it will not further burden the already weak soil.
Mudjacking
uses a sand-based material that is infused with Portland cement. This slurry is hydraulically pumped under the slab to fill voids and raise the concrete. Mudjacking material weighs on average 100 lbs. per cubic foot.
Polyurethane Concrete Raising
uses a foam material that is injected under the slab. When the components of this material are mixed, a reaction causes the material to expand. This expanded foam fills any voids and raises concrete. This material will never lose density. After it is installed, it is permanent and weighs about 2 lbs. per cubic foot.
Holes
After concrete has been raised, the holes are the only visible evidence that the slab has been repaired. For this reason, Polyurethane has gained HUGE popularity because of the nearly invisible 5/8″ holes that remain after the job is completed.
Mudjacking involves drilling a series of 1 5/8” holes in a slab of concrete so the material can be pumped under the settled slab.
Polyurethane concrete raising drills a nearly invisible 5/8" hole and the process calls for considerably fewer holes than traditional mudjacking.
Cost
All concrete raising is typically half the cost of replacement. When large voids are present this can increase the cost of the repair. Polyurethane material is more expensive than mudjacking material, but because of the small hole size, lighter material weight, and fewer injection holes, the cost difference is worth it!
SINKHOLE & VOID FILLING
Sinkhole and void filling
The movement of the earth in sometimes unpredictable. Sinkholes and voids can appear and cause havoc on your home or business. The exact cause can be hard to determine, but many times they are caused by utility pipes, weak soil shifting, or geological changes. You'll notice a sudden sinkhole or void with these telltale signs:
- Cracks in interior walls or foundation
- Tilted trees or standing structures
- Cracks or depressions in the ground
FOAMJECTION
Deep Foamjection is the process of installing foam deeper to increase the load bearing capacity of the soils.
- Can upgrade to sub-surface concrete lifting
- Repair unstable soils
- Installing a stronger foundation to support slabs and structures that settled
- Foam follows the path of least resistance and will fill weak areas
- Fills fissures and ground voids
- Fills voids holding water and displaces collected water
- Increase load bearing capacity of subgrade
- Permanent repair, foam never changes shape or absorbs ground water
- Foam soaks into the weak soils and then expands, binding the soil and making it solid
- Does not leach chemicals into the ground
COMMERCIAL SERVICES
RESIDENTIAL SERVICES
- Ground Stabilization
- Poly vs Mudjacking
- Sinkhole & Void Filling
COMMERCIAL SERVICES
- Warehouse Floor Leveling
- Slab Jacking
LARGE SCALE PROJECTS
SERVICES
Servicing the greater Madison, Wisconsin, Concrete Lifting Technologies is determined in offering you a cost-effective solution to raise your concrete instead of replacing sunken or damaged concrete. By using polyurethane injection foam, we can raise your concrete to provide a sturdy, permanent solution to sinking concrete. It's cleaner, too - we use 5/8" holes to inject our foam, as opposed to 1 ½ - 2" holes for traditional mudjacking operations.
RESIDENTIAL SERVICES
- Soil Stabilization
- Polyurethane Concrete Raise and Support
- Sinkhole & Void Filling
- Foamjection
- Rock Wall Stabilization
COMMERCIAL SERVICES
- Warehouse Floor Leveling
- Slab Jacking
- Void Fills
- Foamjection
- Heaved or Sunken Solar Panel Pilings
LARGE SCALE PROJECTS
- Highways
- Curb Raising
Get Your Free Estimate!
Get in touch and we'll get back to you as soon as we can. We look forward to hearing from you!
Thank you for contacting us.
We will get back to you as soon as possible
We will get back to you as soon as possible
Oops, there was an error sending your message.
Please try again later
Please try again later
Uneven, sinking or cracked concrete can pose a serious threat to any business. From trip hazards to cracked foundations, sinking concrete can keep any business owner up at night. Luckily, we're here to help! We use state of the art polyurethane foam injection material that won't degrade, will leave a seamless and sturdy solution, and will be ready for your customers to use that same day! Plus, you can expect a cost savings of over 50% over replacing your existing concrete.
No matter the size of your organization, we are happy to help. We work with small commercial and retail businesses to large scale municipal and governmental organizations.
WAREHOUSE FLOOR LEVELING
The concrete floor of a warehouse sees a lot of traffic. It's also a source for much consternation for those that need to contend with uneven floors. Settling and sinking concrete floors can lead to trips and falls, insecure structures and a lot more other issues that can threaten your business. Concrete lifting technologies can even out that concrete floor to prevent these hazards. Call us today for a free quote.
SLAB JACKING
Concrete Slab Jacking
Concrete slab jacking is another word for concrete lifting. Since the most popular concrete installations in new homes today are in the form of concrete slabs, we use the term "slab jacking" to reflect what we do. Furthermore, you can apply the term slab jacking to indoor concrete installations as well:
- Warehouses
- Garages
- Indoor Pools
- Greenhouses
- Parking garages
FOAMJECTION
Deep Foamjection is the process of installing foam deeper to increase the load bearing capacity of the soils.
- Can upgrade to sub-surface concrete lifting
- Repair unstable soils
- Installing a stronger foundation to support slabs and structures that settled
- Foam follows the path of least resistance and will fill weak areas
- Fills fissures and ground voids
- Fills voids holding water and displaces collected water
- Increase load bearing capacity of subgrade
- Permanent repair, foam never changes shape or absorbs ground water
- Foam soaks into the weak soils and then expands, binding the soil and making it solid
- Does not leach chemicals into the ground
LARGE SCALE PROJECTS
We pride ourselves in being the concrete lifting contractor that can work on large scale projects, but is still easy to work with. No matter your project, we can help. Examples of businesses that we can typically work with on a large scale include:
- Airports
- Hospital campuses
- Colleges
- Parking garages
- Shopping malls
- Business parks
RESIDENTIAL SERVICES
Hate that uneven concrete? Not only is is unsightly, but it's unsafe. Sinking concrete driveways and sidewalks are common trip hazards that can be dangerous. And, left unaddressed, the problem will only get worse.
That's where we come in. We work with homeowners to address these issues, including:
- Driveways
- Sidewalks
- Staircases
- Patios
Hate that uneven concrete? Not only is is unsightly, but it's unsafe. Sinking concrete driveways and sidewalks are common trip hazards that can be dangerous. And, left unaddressed, the problem will only get worse.
That's where we come in. We work with homeowners to address these issues, including:
- Driveways
- Sidewalks
- Staircases
- Patios
We use polyurethane lifting material that won't break down, leaves less mess than mudjacking, and won't tear up your existing concrete! We work with homeowners to address the issue, and assess the best course of action so you can enjoy your driveway, patio, or sidewalk, worry-free and stress-free for years to come, all at half the cost of replacing your existing concrete.
We also excel in void filling and ground stabilization, for those bigger issues that can pose a serious threat to your home's foundation. We use the same polyurethane injection material to solidify the ground around your home's foundation to give your home a stable base that won't degrade or erode away.
SOIL STABILIZATION
Concrete lifting technologies uses polyurethane foam injection to stabilize the ground that's shifted to secure your house. The polyurethane material will not degrade over time, and will stop this issue from degrading. Contact us today for a free quote.
One of the potentially most disastrous threats to any home is the sinking ground that your home is sitting on. Many times, after a house is built, the ground the house is built on shifts and settles, weakening and changing the structure of the house. You can see evidence of ground shifting in a number of ways:
- Cracks in interior walls
- Cracks in foundation
- doors and windows that won't close or have gaps when closed
POLY VS MUDJACKING
What is the difference between Mudjacking and Polyurethane Concrete Raising?
Material
Settled concrete is commonly a result of poor soil conditions below a slab. Because of this, Polyurethane has become a popular repair method because the material is so lightweight it will not further burden the already weak soil.
Mudjacking uses a sand-based material that is infused with Portland cement. This slurry is hydraulically pumped under the slab to fill voids and raise the concrete. Mudjacking material weighs on average 100 lbs. per cubic foot.
Polyurethane Concrete Raising uses a foam material that is injected under the slab. When the components of this material are mixed, a reaction causes the material to expand. This expanded foam fills any voids and raises concrete. This material will never lose density. After it is installed, it is permanent and weighs about 2 lbs. per cubic foot.
Holes
Polyurethane concrete raising drills a nearly invisible 5/8" hole and the process calls for considerably fewer holes than traditional mudjacking.
Cost
All concrete raising is typically half the cost of replacement. When large voids are present this can increase the cost of the repair. Polyurethane material is more expensive than mudjacking material, but because of the small hole size, lighter material weight, and fewer injection holes, the cost difference is worth it!
Both methods achieve the same results: raise and support sunken or unstable concrete slabs by drilling holes and pumping material under the slab.
Settled concrete is commonly a result of poor soil conditions below a slab. Because of this, Polyurethane has become a popular repair method because the material is so lightweight it will not further burden the already weak soil.
Mudjacking uses a sand-based material that is infused with Portland cement. This slurry is hydraulically pumped under the slab to fill voids and raise the concrete. Mudjacking material weighs on average 100 lbs. per cubic foot.
Polyurethane Concrete Raising uses a foam material that is injected under the slab. When the components of this material are mixed, a reaction causes the material to expand. This expanded foam fills any voids and raises concrete. This material will never lose density. After it is installed, it is permanent and weighs about 2 lbs. per cubic foot.
Holes
After concrete has been raised, the holes are the only visible evidence that the slab has been repaired. For this reason, Polyurethane has gained HUGE popularity because of the nearly invisible 5/8″ holes that remain after the job is completed.
Mudjacking involves drilling a series of 1 5/8” holes in a slab of concrete so the material can be pumped under the settled slab.
Cost
All concrete raising is typically half the cost of replacement. When large voids are present this can increase the cost of the repair. Polyurethane material is more expensive than mudjacking material, but because of the small hole size, lighter material weight, and fewer injection holes, the cost difference is worth it!
SINKHOLE & VOID FILLING
Sinkhole and void filling
The movement of the earth in sometimes unpredictable. Sinkholes and voids can appear and cause havoc on your home or business. The exact cause can be hard to determine, but many times they are caused by utility pipes, weak soil shifting, or geological changes. You'll notice a sudden sinkhole or void with these telltale signs:
- Cracks in interior walls or foundation
- Tilted trees or standing structures
- Cracks or depressions in the ground
FOAMJECTION
Deep Foamjection is the process of installing foam deeper to increase the load bearing capacity of the soils.
- Can upgrade to sub-surface concrete lifting
- Repair unstable soils
- Installing a stronger foundation to support slabs and structures that settled
- Foam follows the path of least resistance and will fill weak areas
- Fills fissures and ground voids
- Fills voids holding water and displaces collected water
- Increase load bearing capacity of subgrade
- Permanent repair, foam never changes shape or absorbs ground water
- Foam soaks into the weak soils and then expands, binding the soil and making it solid
- Does not leach chemicals into the ground
COMMERCIAL SERVICES
Uneven, sinking or cracked concrete can pose a serious threat to any business. From trip hazards to cracked foundations, sinking concrete can keep any business owner up at night. Luckily, we're here to help! We use state of the art polyurethane foam injection material that won't degrade, will leave a seamless and sturdy solution, and will be ready for your customers to use that same day! Plus, you can expect a cost savings of over 50% over replacing your existing concrete.
No matter the size of your organization, we are happy to help. We work with small commercial and retail businesses to large scale municipal and governmental organizations.
WAREHOUSE FLOOR LEVELING
The concrete floor of a warehouse sees a lot of traffic. It's also a source for much consternation for those that need to contend with uneven floors. Settling and sinking concrete floors can lead to trips and falls, insecure structures and a lot more other issues that can threaten your business. Concrete lifting technologies can even out that concrete floor to prevent these hazards. Call us today for a free quote.
SOLAR PANEL PILING STABILIZATION
Solar Panels require strong, dependable support in order to function. Factors like soil conditions, weather or human error can require additional support. Concrete Lifting Technologies fills voids and stabilizes pilings with an eco-friendly polyurethane foam that can withstand 9,000 pounds of pressure!
SLAB JACKING
Concrete Slab Jacking
Concrete slab jacking is another word for concrete lifting. Since the most popular concrete installations in new homes today are in the form of concrete slabs, we use the term "slab jacking" to reflect what we do. Furthermore, you can apply the term slab jacking to indoor concrete installations as well:
- Warehouses
- Garages
- Indoor Pools
- Greenhouses
- Parking garages
SLAB JACKING
Concrete Slab Jacking
Concrete slab jacking is another term for concrete lifting. Since the most popular concrete installations in new homes today are in the form of concrete slabs, we use the term "slab jacking" to reflect what we do. Furthermore, you can apply the term slab jacking to indoor concrete installations as well:
- Warehouses
- Garages
- Indoor Pools
- Greenhouses
- Parking garages
We use the same polyurethane foam injection material in driveways and under other concrete installations to get the secure and durable alternative to mudjacking, at half the cost of replacing your existing concrete.
FOAMJECTION
Deep Foamjection is the process of installing foam deeper to increase the load bearing capacity of the soils.
- Can upgrade to sub-surface concrete lifting
- Repair unstable soils
- Installing a stronger foundation to support slabs and structures that settled
- Foam follows the path of least resistance and will fill weak areas
- Fills fissures and ground voids
- Fills voids holding water and displaces collected water
- Increase load bearing capacity of subgrade
- Permanent repair, foam never changes shape or absorbs ground water
- Foam soaks into the weak soils and then expands, binding the soil and making it solid
- Does not leach chemicals into the ground
LARGE SCALE PROJECTS
We pride ourselves in being the concrete lifting contractor that can work on large scale projects, but is still easy to work with. No matter your project, we can help. Examples of businesses that we can typically work with on a large scale include:
- Airports
- Hospital campuses
- Colleges
- Parking garages
- Shopping malls
- Business parks
No matter the size, Concrete Lifting Technologies is here to serve you, to lift and raise your uneven and sinking concrete.
Give us a call today at 608-658-0202
and see what we can do for you.
